Filter By:
Headsets

$47.00
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets.
- "Zero-Stack"/Cane Creek compatible
- Very low profile designed primarily for Mountain Bikes
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- 7075 alloy crown race
- Laser etched aluminum top cap

$30.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 10mm, 3mm and 2mm (15mm total)
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1-1/8 integrated headset.
- 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).

$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Uses 36/45 degree crown race and compression ring
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

$78.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 109g

$36.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS41/28.6/H9/K
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 41.1mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 37g

$54.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris.
- Stainless Steel Bearings provide unparalleled corrosion resistance
- Highly recommended if your headset will be exposed to wet conditions or sweat
- Lifetime warranty

$39.95
Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price.
- Black Oxide Bearings are made from chromium steel for high load capacity and durability
- Black oxide coating reduces corrosion

$64.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris.
Stainless Steel Bearings provide unparalleled corrosion resistance
Highly recommended if your headset will be exposed to wet conditions or sweat
Lifetime warranty

$34.95
Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price.
- Black Oxide Bearings are made from chromium steel for high load capacity and durability
- Black oxide coating reduces corrosion

$64.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris.
- Stainless Steel Bearings provide unparalleled corrosion resistance
- Highly recommended if your headset will be exposed to wet conditions or sweat
- Lifetime warranty

$59.95
Wolf Tooth Precision Headsets for Trek Knock Block are machined in the USA out of aircraft grade aluminum with superior sealing for protection against the elements. Available in a variety of colors to add some style to your bike. These upper headsets are for Trek frames with molded-in internal bearing cups.
- Designed to work with Trek's Knock Block system
- The top cap on these headsets have unique raised features that key to Knock Block compatible stems (made by Bontrager
- If spacers are needed, you will need to use special Knock Block compatible spacers with notch features
- This product is the upper headset only
- Lower headsets on bikes with Knock Block do not have any unique features. They are usually IS headsets which are available separately

$54.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris.
- Stainless Steel Bearings provide unparalleled corrosion resistance
- Highly recommended if your headset will be exposed to wet conditions or sweat
- Lifetime warranty

$59.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris.
Stainless Steel Bearings provide unparalleled corrosion resistance
Highly recommended if your headset will be exposed to wet conditions or sweat
Lifetime warranty

$26.00 - $32.00
- Pig DH-Pro feature angular contact sealed upper bearing and an industrial cartridge sealed bearing with an alloy upper cup and CrMo lower cup
- Pig feature oversized 1/4" lower ball bearings, 5/32" upper bearings
- Big Fat Pig feature super oversized caged ball bearings
- Pig: External Cup, traditional
- Pig S.H.I.S.: EC34/28.6|EC34/30
- Big Fat Pig S.H.I.S.: EC49/38.1|EC49/40
- Pig DH Pro S.H.I.S.: EC34/28.6|EC34/30
- Stack: 15.4mm/13.6mm (Pig), 17mm/11.7mm (Big Fat Pig), 15.5mm/16mm (Pig DH Pro)
- Color: Black
- Weight: 193g (Pig), 345g (Big Fat Pig), 198g (Pgi DH Pro)

$78.00
FSA Orbit MX threadless headset features TH brand 36-degree angular contact sealed bearings.
- Forged and CNC machined 6061/T6 aluminum cups
- Patented alignment tip for increased durability and performance
- TH Brand 36-degree Angular Contact sealed bearings
- 7075 alloy crown race
- Laser etched aluminum top cap
- EC34/28.6 (36x36) | EC34/30 (36x36)

$43.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: EC44/40/H12/K
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.00mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 65g

$175.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Aluminum dual seal crown race protects lower bearing
- Interlok spacer compatible
- 110 year warranty

$39.99
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

$24.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Classic Drop-In Integrated Headset stands above all others. This alloy beauty features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. Wrapped in our timeless high-polish finish, the Classic Drop-In Upper headset adds that classy detail your bike deserves.
- Stack height: 12.5mm
- Material: Alloy
- Upper Fit (S.H.I.S.): ZS44/28.6
- Upper HT OD/ID: 50/44
- Bearing: Ceramic Hybrid Cartridge (ACB)—Ti Coated
- Weight: 79g

$143.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

$18.95
The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the oversize lower bearing is designed to handle loads. Deep bearing cups promise solid insertion.
- Bearing: Retainer ball bearing
- Material: Steel/Plastic
- Stack Height: 28.3mm

$19.99
- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and an alloy top cover
- Mallet: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 15.4mm/13.6mm
- Color: Black
- Weight: 150g

$92.00
- Carbon fiber top cover
- Upper: Campagnolo angular contact bearings (black seal)
- 1-1/8-inch, 45 degrees/ 45 degrees ACB upper
- 1.5-inch, 36 degrees/ 45 degrees ACB lower
- For tapered 46mm/56mm OD headtube
- For 1-1/8-inch to 1.5-inch tapered fork
Page 1 of 4
Next page