Service Home Product

Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+. - Both uprights move simultaneously to always keep wheel centered in the stand - Accommodates tire widths up to 5-inches+ with or without brake rotor mounted - Speed knob to quickly change axle widths - Accommodates hub widths from 75mm to over 250mm - Precise operation and adjustability - Built in thru-axle adaptors - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

At nearly 20% lighter than our (already) lightweight stand collection, the Ultralight takes no performance shortcuts to achieve its feathery 10.6lb (4.8kg) total weight. Despite a slender scale reading it still possess the same durability and stability of our other stands. With the 360° rotating Slide-Lock clamp and a 54? (137cm) wide base with rubber-coated end caps, confidence in the security of your bike is never in question. And when the service day is done, it folds in to a space-saving unit for storage or travel. Look to our Tool Tray and Pro Truing Station upgrades to create the optimal home bike maintenance setup.

"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"

The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: -  Two 20 mL syringes -  Two hose assemblies with shutoff clips -  One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems -  One open-ended hose assembly -  Bleed funnel with stopper -  Two 10 mm/12 mm universal bleed blocks -  Two 11 mm bleed blocks -  Two adjustable syringe holders -  M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2) -  M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2) -  M6 x 0.75 adapter — Magura® -  M6 x 1.0 adapters — universal (x2) -  M6 x 1.0 adapter — Promax® -  M7 x 0.75 adapter — Shimano® -  Hose compression sleeve — universal -  Fluid disposal bag -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

The BKD-1 Hydraulic Brake Bleed Kit will bleed most models of DOT-fluid-based hydraulic brakes. Hydraulic systems need bleeding to remove any air bubbles and to inject new, clean fluid. - Designed and built for home use and the rigors of daily commercial use - Includes two syringes, hoses with shutoff clips, multi-size bleed blocks and a unique attachable syringe mount - Housed in a rugged reusable case - Machined stainless steel and 7075 aluminum fittings to service SRAM, Hayes, Formula, Hope and other brands of DOT-fluid-based hydraulic brake systems - Replacement parts available - Brake fluid not included

An alignment gauge is essential for diagnosing and repairing bent or misaligned derailleur hangers, often the source of shifting problems. The DAG-3 features an all-new design, engineered and built to be light, accurate, and versatile. The sliding indicator can measure derailleur hanger alignment against bicycle rims of any size and rotates out of the way to clear seat stays, racks, and other obstacles, allowing 360-degree measurement. The long, precision-extruded aluminum body is built to exacting tolerances and provides ample leverage for making adjustments. - Compatible with 16" to 29"+ wheels (ISO/ETRTO rim sizes from 317 to 630+) - Replaceable M10 threaded tip - Low-profile head fits low clearance thru-axle derailleur hangers and Shimano Direct Mount hangers - Length: 16.5" (420mm) - Weight: 22.75 oz. (645g)

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.

The SRAM Pro Disc Brake Bleed Kit is designed for servicing SRAM disc brakes systems.

Lefty Hub Adaptor for The DT Swiss Truing Stand.

This wedge bag has two compartments with foam inserts to keep tools jiggle free. - Features durable 1000 denier, wrap-around zipper, extra-long 3M reflective strip for added safety at night and a zippered expanding main compartment for added storage. Mounts and removes quickly with the innovative QuickClick system. - Built-in rain covers and two-piece rail fixer for easy removal Tool Kit Includes: - 2, 3, 4, 5, and 6mm Allen wrenches - T25 Torx - Phillips screwdriver - 8 and 10mm open wrenches - Universal Chain Tool with chain hook - 2 Tire Levers - Flypaper Glueless Patch Kit

Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.

The Park Tool SBS-1.2 is a shop-quality set of sockets, hex bits, and Torx style bits, selected specifically for common bike repair needs. Ideal for use with Park Tool torque wrenches, the SBS-1.2 3/8" drive bits and sockets are made from tough, chrome vanadium steel for lasting durability.

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Giant tire levers

- Everything you need for a quick fix on the road - 3 tire levers - Patch Kit - 9-function multi-tool - CO2 inflator with 2 16g CO2 cartridges - Seat bag

Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes. - Doesn't absorb water - Lubricates entire braking system

A convenient all-in-one pack containing useful tire-change essentials. Flats happen. Make sure you're prepared with a Bontrager Flat Pack. Featuring the storage, inflation, and tire removal equipment you need to handle an emergency flat repair, this purchase also includes a coupon for a free Bontrager tube so you can get the right size for your bike and tires. Product details - Kit features everything you need to quickly fix a flat, including the seat pack - Includes Pro Small seat pack (non-QC) for quick and easy on-bike storage - Contents include: mini pump, three tire levers, and patch kit - Also includes coupon for a FREE Standard Bontrager Presta or Schrader inner tube

- Incredibly effective cleaning formula containing Nano Technology that also cares for your bike's delicate finishes - Contains no harmful acids, CFC's or solvents and is fully biodegradable - Cuts through dirt, oil and grime quickly and safely leaving your whole bike sparkling clean

A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Liv Tire Levers

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

- Fast action bike cleaner - Readily biodegradable ingredients - Reduced carbon footprint with 94% less packaging - 100% plastic free packaging, 100% water free, 100% environmentally friendly ingredients, including plant based raw materials - Supplied in a compostable sachet and printed with vegetable inks - FSC recycled card box - Re-fill your old bottle and help reduce plastic waste - Dissolves easily in any type of water. Cold, warm and hot. Hard or soft - Safe to use all over the bike - Alkaline based and free from alcohol, CFCs, (EDTA), solvents or acids - Vegan & vegetarian friendly - -01: 4 sachets, 30g each - -02: Power Bundle: 4 sachets, 1x aluminum bottle, 1x bike clener spray trigger, 1x Silicon base for aluminum bottle

The Muc-Off Bike Care Essentials Kit contains all the basic elements you need to be able to look after your bicycle. Clean, polish and protect packed in a tidy tote. - 1 Liter Bike Wash - Drivetrain Cleaner, 500ml - 50ml Bio Dry Lube - MO-94, 400ml - Claw Brush

For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.

High-quality L-key set with color-coded, convenient plastic sleeve. This ensures that the tool is quickly to hand and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. - Hex-Plus allows socket head screws to live longer - Hexagonal ballpoint on the long arm - With Take-it-easy tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures

High-quality L-key set with extra-short arm for use on difficult-to-access screws. For hexagon socket screws. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. Comes in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Extra-short arm for use on difficult-to-access screws - Hex-Plus allows socket head screws to live longer - The ballpoint on the long arm allows dependable working even in difficult situations - Chrome-plated for high corrosion protection - In a practical clip out of wear-free material

Each kit contains: - Nano Tech Bike Cleaner: 1L, Bike Protect: 500ml, Dry Weather Lube 50ml, Bio Degreaser: 500ml, Expanding Microcell Sponge, Claw Brush

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Rings Seals) - 35 Gold RL A1 (2020+)