Skip to main content
      TWO New Eddy's Locations Coming Soon! Read Our Announcement here.

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Saddles

$95.95
The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Cromoly rails
$47.95
The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Steel rails
$142.95
The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Titanium rails
$314.99
A light and lean performance saddle developed directly with Lidl-Trek athletes for comfort through the toughest races. - Race Shop Limited design was developed for the needs of Lidl-Trek athletes - OCLV Carbon shell provides a perfect balance of weight, strength, and compliance - Short profile provides targeted support for riders of any gender in a performance riding position - Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance - Minimally bonded padding shaves weight and creates a sleek, high-end aesthetic - Oversized carbon rails for lightweight strength (specific seat post rail clamps required)
$55.00
A lightweight railed saddle with added durability that can take on anything from the track to the trail due to its composite web design. - Carbonite composite shell construction - 7mm hollow chromoly rails - Ergonomically sculpted shape - Rail Material: Chromoly - Clamp Style: Standard Rails - Material: Composite - Length: 238mm - Width: 126mm - Weight: 175g
$35.00
A lightweight Pivotal saddle with added durability that can take on anything from the track to the trail due to its composite web design. - Carbonite composite shell construction - Lightweight hollow alloy bolt - Lightweight alloy rocker panel - Ergonomically sculpted shape - Clamp Style: Pivotal - Material: Composite - Length: 240mm - Width: 125mm - Weight: 145g
$179.95
Terry's longest distance, lowest profile, widest cutaway Butterfly with something extra: Poron XRD. Designed to take comfort up a notch for endurance riding, the Butterfly Century is engineered with a layer of Poron XRD shock absorbing material between the saddle’s base and foam layers. The Poron XRD reduces road shock and allows for a thinner layer of foam and a narrower overall saddle profile, without loss of rider comfort. A larger foam cutout provides greater soft tissue relief. Additionally, the Century features a thin layer of gel along the top, a wider cutaway, sculpted foam for pressure relief in key areas, and a seamless Fibra-tek cover that reduces the incidence of high cadence chafing. - Fibra-tek cover with Poron XRD shock-absorbing layer - Widest cutaway in the Butterfly line up for maximum pressure relief - Length x width: 262mm x 152mm - Weight: 268 grams; 9.5 ounces - Rails: Ti-316
$78.95
For over two decades, Terry has worked with all levels of riders and addressed all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. One of the best values you can buy in an Italian-made saddle, the Butterfly Cromoly is also one of the most popular saddles in the Terry line. Wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails that allow us to save a few euro and make this variation a great deal. - Length x width: 262mm x 155mm - Weight: 326g / 11.5oz - Rails: FeC alloy - Cover/features: smooth Dura-tek with printed accents - Made in Italy
$174.95
A wider center cutaway and the addition of gel along the top are the primary differentiators between this saddle and our classic Butterfly. The wider relief channel, combined with its contoured rear and thin gel layer, makes the Butterfly Ti Gel + extremely comfortable and ideal for endurance riders. Like all Butterflies, the Ti Gel + shares the basic construction characteristics. It's wider in the rear than typical race saddles for good support of a woman's sit bones. The top is flat and low profile, and we've used the ideal blend of stiffness/softness in the injection molded foam to allow for good support and power while pedaling. Outfitted with lightweight ti rails and hand made in Italy. - Leather cover with perforated Butterfly pattern - Thin gel layer along the top of the saddle provides an additional level of comfort - Widest cutaway in the Butterfly line-up for maximum pressure relief - Length x width: 262mm x 155mm - Weight: 255 grams; 9 ounces - Rails: Ti-316
$164.95
For nearly three decades, Terry has been working with all levels of riders to solve all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. The Butterfly Ti has a textured leather cover that will wear beautifully over time and keep you solidly planted on the saddle. Wider in the rear than typical race saddles for good support of a woman's sit bones; completely cutaway through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with injection molded foam that's stiff enough to give you more power for pedaling. - Debossed butterfly graphic - Textured leather cover - Signature Butterfly cutaway through center of saddle for pressure relief - Length x width: 262mm x 155mm - Weight: 248 grams; 8.7 ounces - Rails: ti-316
$199.95
The Butterfly Carbon is the lightest of the Butterflies thanks to the addition of carbon rails. It's wider in the rear than typical saddles for good support of a woman's sit bones. The Butterfly Carbon's low profile, flat top, and a complete cutaway through the center are designed to provide pressure relief and support in the right areas. Injection-molded foam is used to provide the right balance of softness and stiffness so you won't sink into the saddle the longer you ride. - Black leather with gloss butterfly graphic and patent leather rear - Signature Butterfly cutaway through the center of the saddle for pressure relief - Length x width: 262mm x 155mm - Weight: 218 grams; 7.7 ounces - Rails: lightest weight Carbon 10mm H (+/- .5mm) x 7mm W (+/- .5mm) note: check seat post for compatibility as it may require an adapter kit (available from some seat post manufacturers)
$52.95
A layer of gel across the top gives an additional level of relief to the Cite X Gel. It was designed for recreational riders who spend a half-day on the bike or less, ride nearly upright with lots of weight against the saddle, prefer the closest thing to a pillow or have significant lower back pain. A completely seamless, heavily contoured top with a large cutaway will hit and miss in all the right places. Shock-absorbing elastomers molded into the saddle base create the effect of springs without any mechanical devices. They also help eliminate vibrations from the road or surface that ordinarily get transferred straight to the spine. A durable synthetic top with rear graphics is easy to maintain and will look new for years. - Seamless synthetic cover with screen-printed graphics - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Thin gel layer along the top of the saddle provides an additional level of comfort - Length x width: 249mm x 175mm - Weight: 454 grams; 16.0 ounces - Rails: satin steel
$42.95
Terry's Cite X saddle was designed for recreational riders who spend a half-day on the bike or less, ride nearly upright with lots of weight against the saddle, prefer the closest thing to a pillow, or have significant lower back pain. A completely seamless, heavily contoured top with a large cutaway will hit and miss in all the right places. Shock-absorbing elastomers molded into the saddle base create the effect of springs without any mechanical devices. They also help eliminate vibrations from the road or surface that ordinarily get transferred straight to the spine. A durable synthetic top with rear graphics is easy to maintain and will look new for years. - Seamless synthetic cover with screen-printed graphics - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Length x width: 249mm x 175mm - Weight: 425 grams; 15 ounces - Rails: Satin steel
$59.95
A layer of gel across the top gives an additional level of relief to the Cite X Gel. It was designed for recreational riders who spend a half-day on the bike or less, ride nearly upright with lots of weight against the saddle, prefer the closest thing to a pillow, or have significant lower back pain. A completely seamless, heavily contoured top with a large cutaway will hit and miss in all the right places. Shock-absorbing elastomers molded into the saddle base create the effect of springs without any mechanical devices. They also help eliminate vibrations from the road or surfaces that ordinarily get transferred straight to the spine. A durable synthetic top with rear graphics is easy to maintain and will look new for years. - Seamless, synthetic top - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Thin gel layer for added comfort - Length x width: 274mm x 173mm - Weight: 479 grams; 16.9 ounces - Rails: steel
$189.95
In designing the Corta saddle for women, we endeavored to create an entirely new shape for performance riders whose riding style has evolved. Maybe you're more competitive, riding longer distances, or have a new bike that you can't get comfortable on – this snub-nose style saddle could be your solution. The Corta has a shorter overall length and a dropped nose which combine to eliminate excess surface area, prevent chafing, and alleviate pressure. We've also engineered it with our largest cutaway for the greatest relief channel possible. It's supportive and flat at the rear so you have a good platform for sustained, seated climbs. Aesthetically, the Corta is a streamlined beauty with textural detail and state-of-the-art technology. If you're ready to step up to the latest in technology, Terry comfort engineering, and high-performance design, Corta was made for you. - Seamless bond between Dura-tek cover and micro-suede panels provides a smooth contact surface to reduce chafing - Screen-printed graphics and perforations - Largest cutaway in the Terry saddle line - Length x width: 250mm x 149mm - Weight: 235 grams - Rails: Ti-316
$78.95
Terry's best selling saddle for men, in its best-value Fly Chromoly package. Ridden and universally loved around the world, the original Terry Fly is the kind of saddle you just don’t think about. You'll see them on every kind of bike, ridden by everyone from pro riders to Silicon Valley entrepreneurs. RAAM riders and Randonneurs swear by them. Magazine editors have all hailed them as the most comfortable saddles for men. And if you’re reading this, chances are you’re no stranger to the Fly, either. This synthetic-covered, vegan-friendly version is flat across the top with multi-density injection-molded foam that’s a bit stiffer in the rear for more power while pedaling; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; seamless across the entire top to reduce the potential for chafing; equipped with chromoly steel rails that make this saddle a great value. - Smooth Dura-tek with screen-printed accent - Completely seamless across saddle top to reduce the potential for chafing - Center cutaway with rear relief channel to reduce contact points - Length x width: 277mm x 140mm - Weight: 316 grams; 11.1 ounces - Rails: FeC alloy
$34.95
For use in the gym or on the road, a Terry gel saddle cover can be a lifesaver when dealing with bad exercise bikes and uncomfortable bike saddles. - Synthetic nylon/Lycra cover - Gel insert made of a semi-fluid polymer that supports and distributes pressure - Contoured shape with center depression strategically located for pressure relief against soft tissue area - Secures with a tie tether over standard bike seats up to 7 inches in width and 10 inches in length - Length x width: 264mm x 160mm - Weight: 196 grams; 6.9 ounces
$65.95
With over 100,000 currently on the road, the Liberator X for women has earned its reputation as one of the most comfortable saddles for nearly any kind of rider. We recommend it to people who are in a slightly more upright riding position on their bike, have a high degree of saddle sensitivity, ride great distances, tour by bike, and are likely to ride daily. The ergonomically-shaped back panel of the Liberator X reduces the points of stitching contact between you and your saddle. A wider, contoured rear, large cutaway with extended depression off the back, and more padding throughout make the Liberators excellent options for touring (also available in gel and elite versions). - Black Dura-tek cover with gray stitching - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Length x width: 249mm x 163mm - Weight: 377 grams; 13.3 ounces - Rails: Satin steel
$75.95
With over 100,000 currently on the road, the Liberator X for women has earned its reputation as one of the most comfortable saddles for nearly any kind of rider. We recommend it to people who are in a slightly more upright riding position on their bike, have a high degree of saddle sensitivity, ride great distances, tour by bike, and are likely to ride daily. One notch higher on the comfort scale, Terry's Liberator X Gel for women is as soft a touring saddle as you should buy if you're a pretty serious rider. Lots of people make the mistake of thinking that a really soft, squishy saddle is the solution to their seat woes, but after an hour they begin squirming because the pressure is spread evenly across all areas. We've engineered this saddle to give you all the softness you need, with good support below. The ergonomically-shaped back panel of the Liberator reduces the points of stitching contact between you and your saddle. A wider, contoured rear and large cutaway with extended depression off the back also add to the structural comfort. - Perforated black Dura-tek cover with gray stitching - Thin gel layer along the top of the saddle provides an additional level of comfort - Length x width: 249mm x 163mm - Weight: 411 grams; 14.5 ounces - Rails: Satin steel
$99.95
Our Topo mountain bike saddle for women takes everything we've learned about saddle comfort and tailors it to the specific needs of female mountain bikers. It's a sleek, low profile design with a narrower shaped, flat rear platform that aids in your climbing performance and quick rear dismounts. The center has one of our widest cutaways to increase comfort and eliminate pressure points. And what really defines Topo is the use of a durable, Fibra-tek with a debossed topographic map of Vermont's Kingdom Trails. Made by hand in Italy. - Fibra-tek cover with a debossed topographic map of Vermont's renowned Kingdom Trails - Terry's signature cutaway through the center of the saddle for pressure relief - Length x width: 262mm x 150mm - Weight: 310 grams; 10.9 ounces - Rails: FeC alloy
$50.00
The Body Geometry Comfort Gel is ergonomically designed and scientifically tested to provide unmatched comfort and support while reducing pressure on soft tissue. - Plush foam combined with gel inserts delivers unmatched comfort. - Anatomically designed Body Geometry groove improves blood flow and comfort. - Vacuum formed construction creates a durable and waterproof saddle. - Level 5 padding: Ideal for commuting and casual riding - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$140.00
The Bridge Comp with Mimic technology is the perfect saddle choice for both on- and off-road riding. The broad, flat profile provides added control, while the Level 3 padding adds exceptional sitbone comfort. The center channel equipped with our patented, award-winning MIMIC technology perfectly adapts to your body to give you the support and comfort you need. This Comp version is equipped with light, durable Cr-Mo rails, as well as an even softer density, Level 3 padding for extra comfort. - Durable hollow Cr-Mo rails. - Innovative MIMIC technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Level 3 padding: Low/Medium density foam provides the perfect blend of bike feel and cushioning. - Lightweight and durable carbon-reinforced shell. - Patented Body Geometry design is lab-tested for both men and women to assure blood flow to sensitive arteries. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$60.00
The Bridge Sport is the perfect saddle choice for both on- and off-road expeditions. The broad, flat profile allows for added control, while the patented Body Geometry channel is optimized to assure proper blood flow to sensitive arteries. - Patented Body Geometry design is lab-tested to assure blood flow to sensitive arteries - Lightweight and supportive PU foam for increased comfort on longer rides. - Lightweight and super-durable steel rails. - Level 3 padding: Extra padding for increased vibration dampening. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions
$50.00
Specialized's Expedition Gel Saddle is a comfortable addition to any fitness, commuter, or cruiser bike. It boasts a supportive, ergonomic Body Geometry design, rear springs and plenty of gel padding.
$140.00
The Specialized Phenom Comp is a mountain bike saddle that's designed for comfort and strength over long days on the trail. It features a carbon-reinforced construction, Cr-Mo rails, and SWAT mounts for the utmost in utility. - Patented Body Geometry Design is lab tested to assure blood flow to sensitive arteries. - Carbon-reinforced shell with flexible Adaptive Edge technology adapts to your body for a custom fit and all-day comfort. - Low friction panels on the nose and tail improve pedaling efficiency and mobility while moving ‘on and off’ the saddle. - Light and super-durable, hollow Cr-Mo rails. - Lightweight and supportive PU foam for increased comfort on longer rides. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 254g - Size 155mm / Weight 260g
$140.00
For as long as there've been saddles, women have been having issues with them. But, where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And, when you combine this technology with the long-nosed, flat profile of the Phenom Comp saddle, with its hollow Cr-Mo rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Level II padding: Medium density foam for bike feel with additional cushioning. - Light, durable, and hollow Cr-Mo rails. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$160.00
The Specialized Power Arc Expert saddle expands on the success of the original Power saddle. It features the same channel, length, and hollow titanium rails as the original and Pro Arc, but where it differs is in its shell and padding. But this means that it still features a stiff composite shell and supple, Level 2 PU padding. The shape of the saddle is also designed to provide ample sit bone support, and this has been coupled with a shorter-than-usual nose section to keep pressure off of soft tissue while riding in aggressive positions. Specialized even took this ideology a step further via an extra wide and elongated Body Geometry channel that's been proven through blood flow testing and pressure mapping to reduce numbness and pressure on unwanted areas. And while this all seems familiar if you're already a Power loyalist, this iteration features a curved Body Geometry shape that better contours to your body. What does this mean for your ride? It means that you'll feel as if you're “in the saddle," not on it. And ultimately, this equates to greater comfort and superior performance in all seated positions, whether you're a man or woman. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries. - Lightweight and supportive PU padding for comfort and support on longer rides. - Lightweight, durable, and hollow titanium rails. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight: 233g - Size 155mm / Weight: 235g - Size 168mm / Weight: 238g
$140.00
Specialized's lightweight Power Comp saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. • Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries • Stiff, carbon-reinforced shell for longevity and all-day riding efficiency • Lightweight and supportive PU padding for comfort and support on longer rides • Lightweight and super-durable hollow Cr-Mo rails • Tough, light and water resistant cover • Level 2 padding: Medium density foam; bike feel with additional cushioning • SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions
$200.00
The Perfect Reflection of You. The Power Expert with Mirror saddle combines comfort and performance for riders whether they are podium-seeking crushers or everyday cruisers. The Body Geometry designed Power shape with high-tech Mirror inserts provide sit bone-friendly support road to mountain uses. ATTAINABLE TECH: The Power Expert with Mirror saddle provides riders with a significant reduction in pain-causing pressure when compared to it's foam counterpart, the Power Comp Saddle. Inside the saddle are two tear drop shaped Mirror Technology inserts that target sit bone pressure. Riders around the world will be stoked that the new Expert level Power Saddle with Mirror technology make these benefits more attainable than ever. POWER SHAPE: Our beloved Power shape, with a cutout. The patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. Is it a road saddle? Mountain saddle? In short, yes. We hate to say a product works "for everything", but it does. We believe that performance-in saddle speak-means comfort. And whatever shape and material suits you, will be your highest performing saddle. MIRROR TECHNOLOGY: We developed Mirror technology by 3D printing from a liquid polymer to be a perfect reflection of you. Mirror technology allows for infinite density tuning with a single material, but any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retul data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones. ANY BODY, EVERY RIDE: We know that every body is different, but the issues facing riders in the saddle are the same—sit bone pressure, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and blood flow studies, Body Geometry and Mirror Saddles don't just promise to solve these issues for people-we've proven they do. Plus, this is the first saddle with Mirror technology in additional sizes (130 and 168). ALL AROUND USE: The Power Expert With Mirror saddle uses the same 3D printed technology as the S-Works Power with Mirror except the Expert has 4-way stretch cover to keep mud and debris out of the nooks and crannies of the Mirror lattice. That dirt-shedding feature, plus super durable, yet light weight hollow titanium rails make the Power Expert with Mirror the smart choice for gravel and mountain riders, in addition to those who stick to paved surfaces. Web Bullets - Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries. - Mirror technology inserts to provide additinal sit bone relief. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Lightweight and durable hollow Ti rails. - Supportive and lightweight PU foam surrounding the 3D printed inserts. - Size 130mm / Weight: 210g - Size 143mm / Weight: 214g - Size 155mm / Weight: 225g - Size 168mm / Weight: 227g
$325.00
Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position. The Power Pro with Mirror starts with our Power shape—beloved by riders worldwide for its extra-wide and elongated Body Geometry channel—and is topped with the exact same Mirror pad as our S-Works Power with Mirror, a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually to deliver unprecedented sit bone comfort and soft tissue protection. But our Pro-level saddle features titanium rails and a reclaimed carbon fiber base to bring Mirror technology to more riders on more terrain than ever before. The bike may be the most sustainable transportation ever created, but we need to do more. The saddle's carbon base is built with our all-new reclaimed carbon process. This is our first step on the road to closed-loop production, maximizing efficiency in production and minimizing waste. Using carbon scraps from factory production, combined with injected nylon, we're building a more sustainable carbon base. With the Power Pro's titanium rails, Mirror technology is now more durable than ever. It's so strong that our Mirror technology is now trail-ready, so go ahead and huck that gap. Trail riders have sit bones too, after all. Whether you're on the road or trail, going up or down, the Power Pro with Mirror will get you there comfortably and quickly. It's the perfect reflection of you. - Titanium rails. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Approximate weight: 251g (Size 155mm) - Approximate weight: 245g (Size 143mm)