Skip to main content
      TWO New Eddy's Locations Coming Soon! Read Our Announcement here.

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Pedals

$54.99
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!
$179.99
TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
$89.99
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details - Optimal surface area - Minimal profile 16mm thin - 10 adjustable 8mm pins per side for grip - 10mm pins available for purchase here - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Serviceable, pedal refresh kit available Specs - Adjustable pins: 10 per side - Body Material: A380 Aluminum - Endcap: T15 - Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large) - Inner Bearing Type: Igus Bearing - Max Rider Weight: No restriction - Outer Bearing Type: Double Cartridge Bearing - Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large) - Spindle Material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 439g per pair (Small), 494g per pair (Large)
$17.99
A set of durable, SPD-compatible replacement cleats that come with all mounting hardware. Get that fresh cleat feel These solidly-built cleats work with any SPD-compatible pedals whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit. Product details - Compatible with all 2-bolt SPD-style pedals - Directly compatible with Bontrager Comp MTB and Commuter pedals - Includes mounting hardware - Float: 4-deg
$29.99
The Bontrager City Pedal Set delivers comfortable foot support and reliable traction to keep you confidently connected to your bike. It features reflective edges on the front and rear to add visibility in low-light conditions, and a strong, durable, and easily serviceable chromoly axle to keep you rolling smoothly ride after ride. - Nylon concave body supports and stabilizes foot while pedaling - Anti-slip texture for traction and confidence - Front and rear reflective panels add visibility in low-light conditions - Durable chromoly spindle with long- lasting, serviceable bearings - Installs with 6mm hex key or flat 15mm pedal wrench
$72.99
Ready for city shoes or cycling shoes Be ready for anything with the Bontrager Commuter pedal. This dual-sided pedal features a confident platform on one side and a cycling shoe clip-in on the other. Durable materials and sealed cartridge bearings ensure lasting performance for this SPD-compatible pedal. Cleats and hardware included. - Versatile SPD-compatible and platform combo design - Durable Chromoly spindle for long-lasting durability - Sealed cartridge bearings provide smooth, reliable feel - Adjustable release tension - Includes cleats and mounting hardware - Spindle: 9/16-inch
$93.99
Get ready to ride Take your riding to the next level with Bontrager Comp MTB pedals. A fully adjustable release tension lets you dial in the right feel for your ride and adds the confidence and efficiency of a secure connection to your bike. Durable materials and sealed cartridge bearings ensure lasting performance for this SPD-compatible pedal. Cleats and hardware included. - MTB pedals with dual sided SPD-compatible engagement - Durable Chromoly spindle for long-lasting durability - Sealed cartridge bearings provide smooth, reliable feel - Adjustable release tension - Includes cleats and mounting hardware - Spindle: 9/16-inch
$83.99
Get ready to ride Take your riding to the next level with Bontrager Comp road pedals. A fully-adjustable release tension lets you dial in the right feel for your ride and adds the confidence and efficiency of a secure connection to your bike. Durable materials and sealed cartridge bearings ensure lasting performance for this Look Keo-style pedal. Cleats and hardware included. - Road pedals with Look KEO-style compatibility - Durable Chromoly spindle for long-lasting durability - Sealed cartridge bearings provide smooth, reliable feel - Adjustable release tension - Includes cleats and mounting hardware - Spindle diameter: 9/16-inch - Weight: 282g
$104.99
Bontrager Elite road pedals give you a secure, efficient, confidence-inspiring connection to your bike. They're built with a lightweight and durable composite body, fully adjustable release tension that lets you dial in the feel you want, and sealed cartridge bearings for lasting performance. Compatible with Look Cycle's KÉO brand cleats. Cleats and hardware included. Fine-tuned Release A fully-adjustable tension release bolt lets you dial in or out for the perfect feel. Thread the bolt clockwise to make it harder to release, or counter-clockwise for an easier release. - Compatible with Look Cycle's KÉO brand cleats - Lightweight and durable composite pedal body design - Durable Chromoly spindle for long-lasting durability - Sealed cartridge bearings provide smooth, reliable feel - Adjustable release tension - Includes cleats and mounting hardware - Look and KÉO are trademarks of Look Cycle International. Look Cycle International has not endorsed or approved this pedal - Spindle diameter: 9/16-inch - Weight: 250g
$24.99
Confident and durable The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with sealed cartridge bearings ensure lasting performance. Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip. - Durable nylon body with a proven shape for comfort and confidence - Sturdy axle boosts durability and spins smoothly on sealed cartridge bearings - Nylon traction pins provide forgiving, confident traction - Simple to install with either 6mm hex or standard 15mm pedal wrench
$39.99 $51.99 23% Off
MTB flat pedals with a durable nylon design and replaceable pins for consistent grip. Confident and durable Most downhillers, dirt jumpers, and enduro riders prefer flat pedals, but any trail rider can appreciate the benefits of the Line Elite MTB pedal. It features a durable nylon body and solid platform with replaceable traction pins, so every time you place your foot your shoe stays put. It also has a durable axle and sealed cartridge bearings to ensure lasting performance. - Durable nylon body with a proven shape for comfort and confidence - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with either 6mm hex or standard 15mm pedal wrench - Spindle diameter: 9/16-inch
$99.99
Grippy, durable flat pedal for trail and park use. Find it. Rip it. Choose your line Flat pedals are the preferred choice of downhillers, dirt jumpers, and enduro riders, but any trail rider can reap the benefits of a pedal born from the demands of those elite riders. A curved body and solid platform with traction pins mean that every time you place your foot, your shoe stays put. Lift off at any moment knowing you can stamp back down on the gas and find firm placement. Product details - Dial in your preferred traction with tuneable pin placement and contact height - Durable axle spins on sealed cartridge bearings - Pedal body is made from 6061-T6 aluminum - Threading: 9/26” (15mm)
$24.99
Get that fresh cleat feel These solidly-built cleats work with Bontrager road pedals or any Look Cycle’s KÉO-compatible clipless pedals. Whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit. Product details - Replacement cleats for all Look Cycle’s KÉO®-compatible road pedals - Directly compatible with Bontrager Comp Road pedals - Set includes 1 pair
$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel
$50.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
$25.00
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°
$119.00
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. -  Weight: 332g CrMo -  Body: 60661 CNC AL -  Spindle: Cromoly -  Bearings: 3 Cartridge  -  Springs: SWP  -  Cleat: XPEDO XPT (6° Float)
$189.00
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) *Titanium spindles have 180lbs weight limit.
$99.00
- Weight: 220g  - Body: NEP Injection-Molded - Spindle: Cromoly  - Bearings: 3 Cartridge - Springs: SWP  - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
$199.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$20.00
Wellgo Clipless Cleats for SPD Style pedals.
$39.95
Wellgo WPD-823 Clipless Mountain Pedals. - Includes 98A cleats, Shimano SM-51 compatible - Dual-spring release/entry tension adjustment - Four degrees of Rotation - 9/16"
$279.99
Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs. - Weight: 224g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 39º - Bearing: Sealed
$64.00
Velo Orange Pedals - Extruded and CNC-machined aluminum, sandblasted silver finish - 90 x 60mm platform with two replaceable pins on each side - Toe-clip compatible - 9/16"
$80.00
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability. - 345 grams - 9/16" axles
$22.00
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float). - Fits VP and Look Keo pedals (pedals sold separately)
$90.00
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability. - 406 grams - 9/16" axles