Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Headsets
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$2.75
- Machined aluminum spacers for tuning stem height
- Black spacers with white FSA graphic
- 5mm and 10mm Spacers are sold individually
- 1-1/8" Spacer Kit includes: (3) 3mm, (4) 5mm, (3) 10mm, (2) 20mm
$9.95 - $12.95
- Fork crown race for genuine Ritchey headsets
- Alloy with 45-degree taper
$10.45
Grade 300 retainer bearings for headset and bottom bracket service
- 5/32" ball diameter
- 20 balls per retainer
- Grade 300 Bearings
- 10 Retainers/Bag
$10.45
Loose ball headset bearing retainers.
- Grade 300 bearings
$11.00
FSA Standard Headset Bearings
$13.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$13.99
Custom Cane Creek lower race for Salsa.
$14.95
Headset bearings for Wolf Tooth headsets.
- Replacement bearings
$14.99 - $39.99
- No. series headsets offer excellent performance and value
- No. 8b: 36x45 degree Cane Creek Integrated, or No. 10: Zero Stack shallow available for 1-1/8" applications
- No. 10 S.H.I.S.: ZS44/28.6|ZS44/30
- No. 8B S.H.I.S.: IS42/28.6|IS42/30
- Stack: 5.2mm/3.7mm (No. 10), 8mm/1mm (No. 8B)
- Color: Black
- Weight: 93g (No. 10), 74g (No. 8B)
$14.99 - $19.99
- Forged steel cups with caged 5/32" ball bearings
- TH-857 features a alloy top cover
- TH Series: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 14.9mm/11mm
- Color: Black
- Weight: 126g
$16.95
Compatible crown races for Ritchey headsets.
- This adaptor allows 36° headset bearings, such as those from Chris King, to fit the Ritchey WCS Carbon Adventure fork that feature a 45° crown race
- This adaptor is designed for the Ritchey Carbon Adventure fork, but it will work with all Ritchey carbon fiber forks, though with possible slight cosmetic inconsistencies
- Stainless steel
- Use of this adapter will effectively increase fork length by 4.4mm
$18.00
ABI Headset Bearing for new builds or replacements.
$18.00
Replacement headset uppers from FSA.
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
- Bearing Type: Cartridge
- S.H.I.S Upper: IS41
- Upper Stack Height: 8.2
$19.95
Headset bearings for Wolf Tooth headsets.
- Replacement bearings
$19.99
- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and an alloy top cover
- Mallet: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 15.4mm/13.6mm
- Color: Black
- Weight: 150g
$19.99
- Carbon fiber top caps, bolt and steel star nut
- Size: 1-1/8"
- Color: Black
- Weight: 21g
$20.00
- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and a nylon top cover
- Hammer: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 12.8mm/11.9mm
- Color: Black
- Weight: 149g
$20.48
Grade 300 retainer bearings for headset and bottom bracket service
- 5/32" ball diameter
- 22 balls per retainer
- Grade 300 Bearings
- 10 Retainers/Bag
$20.99
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$21.99
A new headset gives you a new lease on life. This is the upper part of an integrated headset for a 44mm headtube.
- Lower part of the headset sold separately
$22.00
ABI Headset Bearing for new builds or replacements.
$24.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Classic Drop-In Integrated Headset stands above all others. This alloy beauty features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. Wrapped in our timeless high-polish finish, the Classic Drop-In Upper headset adds that classy detail your bike deserves.
- Stack height: 12.5mm
- Material: Alloy
- Upper Fit (S.H.I.S.): ZS44/28.6
- Upper HT OD/ID: 50/44
- Bearing: Ceramic Hybrid Cartridge (ACB)—Ti Coated
- Weight: 79g
$25.00
FSA Standard Headset Bearings
$25.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$25.99
- Weight: 160g
- Crown Race: 30
- S.H.I.S. Lower: EC34
- S.H.I.S. Upper: EC34
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$26.00 - $62.00
- Pig DH-Pro feature angular contact sealed upper bearing and an industrial cartridge sealed bearing with an alloy upper cup and CrMo lower cup
- Pig feature oversized 1/4" lower ball bearings, 5/32" upper bearings
- Big Fat Pig feature super oversized caged ball bearings
- Pig: External Cup, traditional
- Pig S.H.I.S.: EC34/28.6|EC34/30
- Big Fat Pig S.H.I.S.: EC49/38.1|EC49/40
- Pig DH Pro S.H.I.S.: EC34/28.6|EC34/30
- Stack: 15.4mm/13.6mm (Pig), 17mm/11.7mm (Big Fat Pig), 15.5mm/16mm (Pig DH Pro)
- Color: Black
- Weight: 193g (Pig), 345g (Big Fat Pig), 198g (Pgi DH Pro)
$26.95 - $31.95
The Ritchey Comp Cartridge Drop In Integrated headset lower features full-complement, stainless steel, angular contact, sealed cartridge bearings packed with Ritchey high-webbing grease.
- Material: Alloy
- Bearing: Sealed cartridge
- Weight: 39g
$26.95
The Ritchey Comp Cartridge Drop In Integrated headset upper features full-complement, stainless steel, angular contact, sealed cartridge bearings packed with Ritchey high-webbing grease.
- "Size" = Top cap height
- Material: Alloy
- Upper Fit (S.H.I.S.): IS42/28.6
- Upper Bearing OD: 41.8
- Top Cover OD: 46
- Bearing: Sealed cartridge
- Weight: 35-44g
$26.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 10mm, 3mm and 2mm (15mm total)
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1-1/8 integrated headset.
- 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).
$27.99
The Revolver headset features a high precision CNC 6061 Aluminum bearing cover with triple rubber seals for a perfect fit.
- Campy spec 45x45 sealed bearings
- 15mm dust cover stack height
- 2.7oz (76.54g)
- Materials: Aluminum Cover, Chromoly Crown Race
$28.95 - $42.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease.
- Material: Alloy
- Bearing: Sealed cartridge, Ti-coated
- Weight: 28-35g
$28.99
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 15mm dust cap. With 3mm, and 2mm spacers
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1 1/8-inch integrated headset.
- 45º tapered bearings
- 41.8mm outer diameter (fits 42mm BMX head tubes).
$29.00
Can Creek's Angleset headsets let riders change the headtube angle of their mountain bike with ease. With adjustments ranging from 0.5 to 1.5-degrees, dialing in the perfect geometry has never been easier.
• Technical Description: EC56/40/H14/K
• Offset angle: 0.5, 1.0, 1.5 degree
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Sealed
• Bottom Stack Height: 14-15mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 7075 aluminum
$29.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease.
- Top cap: 8.3 or 15.3mm
- Material: Alloy
- Upper Fit (S.H.I.S.): IS42/28.6
- Lower Fit (S.H.I.S.): IS42/30
- Upper Bearing OD: 41.8
- Lower Bearing OD: 46/42
- Top Cover OD: 46
- Bearings: Sealed cartridge
- Weight: 74g
$29.95
A key component of the new Ritchey Switch System, Ritchey's newest headset upper is designed to specifically work with the Ritchey Switch Stem to route cables, wires and hydraulic lines from the handlebar through to the bicycle frame. Cables are routed from the handlebar into the headset conduit, which sits on the underside of the Switch Stem and then travel through an opening on the front of the Switch headset spacers before passing through two channels on the top of the headset and into the frame. This system allows headset bearings to perform without any interference from cables, wires, or lines passing through the headtube.
$29.95
A key component of the new Ritchey Switch System, Ritchey's newest headset upper is designed to specifically work with the Ritchey Switch Stem to route cables, wires and hydraulic lines from the handlebar through to the bicycle frame. Cables are routed from the handlebar into the headset conduit, which sits on the underside of the Switch Stem and then travel through an opening on the front of the Switch headset spacers before passing through two channels on the top of the headset and into the frame. This system allows headset bearings to perform without any interference from cables, wires, or lines passing through the headtube.
$29.95
Wolf Tooth Performance Headsets feature Black Oxide Cartridge Bearings, balancing quality and price.
- Black Oxide Bearings are made from chromium steel for high load capacity and durability
- Black oxide coating reduces corrosion
$29.99
- Gyro compatible, 45/45 degree angular contact cartridge bearings, alloy crown race
- Impact: 45x45 degree Campagnolo Integrated
- S.H.I.S.: IS42/28.6|IS42/30
- Stack: 8mm/1mm
- Color: Black, Orange, Red
- Weight: 68g
$30.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS52/30/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: N/A
• Weight: 72g
$30.99
This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$31.95
For bikes with press-fit head tubes, the Ritchey Comp Press Fit headset stands out above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. The upper bearing is a sealed cartridge, while the lower bearing is coated in titanium.
- Upper Fit (S.H.I.S.): ZS44/28.6
- Upper HT OD/ID: 50/44
- Lower Fit (S.H.I.S.): ZS44/30, ZS55/40, ZS55/40
- Lower HT OD/ID: 50/44, 61/55, 61/55
- Material: CroMo
- Top cap: 7.3 or 12.4mm
- Upper Bearing: Sealed cartridge
- Lower Bearing: Ti coated, sealed cartridge
- Weight: 83g (7.3mm), 103g (12.4mm)
$31.99
High-quality replacement headset bearings are smooth like butter.
- Sealed cartridge bearing for long life
- Durable steel bearing housing
$32.95
The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the lightweight, precision-machined aluminum cups are deep for solid insertion.
- Bearing: Semi cartridge
- Material: Steel
- Stack Height: 30.2mm
$32.95
Comp Logic Threadless Headset
- Lightweight, precision-machined aluminum cups
- Deep cups for solid insertion
$32.95
Works specifically with the Ritchey Switch Stem (part #RC1560-64) to route cables, wires, and hydraulic lines from the handlebar through to the bicycle frame.
$32.99
Cane Creek compatible integrated style bearings fit directly into headtube.
- 36-degree inner chamfer and 45-degree outer chamfer
- Crown Race: 30
- S.H.I.S. Lower: IS41
- S.H.I.S. Upper: IS41
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$33.95
Designed for bicycles with press-fit headsets, the Classic Press Fit Upper Headset features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. Wrapped in our timeless high-polish finish, the Classic Press Fit Upper headset adds that classy detail your bike deserves.
- Top cap: 7.3
- Material: Alloy
- Upper Fit (S.H.I.S.): ZS44/28.6
- Upper HT OD/ID: 50/44mm
- Bearing: Sealed cartridge
- Finish: High-polish silver
- Weight: 43g (7.3mm)
$33.95
The Ritchey Comp Cartridge Press Fit Upper Headset features full complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease.
- Top cap: 7.3 or 12.4mm
- Material: CroMo
- Upper Fit (S.H.I.S.): ZS44/28.6
- Upper HT OD/ID: 50/44
- Bearing: Sealed cartridge
- Weight: 43g (7.3mm), 51g (12.4mm)
$33.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features semi-cartridge high-quality bearings.
- Material: Steel
- Top Cover OD: 46mm
- Bearings: Semi-cartridge
- Weight: 74-83g
$33.99 - $44.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height.
- Sealed black oxide bearings
- Steel crown race with integrated seals
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$34.00
Replacement headset uppers from FSA
- Internal HS Upper Orbit-Z
- Steerer diameter: 1-1/8"
- ZS44/28.6 (36 x 45)
- 5.3/13.1mm
$34.95
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets.
Lower assembly features:
- Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions.
- 12.25mm stack.
- Service and additional parts available.
$34.95
Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price.
- Black Oxide Bearings are made from chromium steel for high load capacity and durability
- Black oxide coating reduces corrosion
$34.95
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets.
Lower assembly features:
- Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions.
- 12.25mm stack.
- Service and additional parts available.
$34.95
Headset bearings for Wolf Tooth headsets.
- Replacement bearings
$34.95
Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Performance Headsets with Enduro black oxide bearings have a one-year warranty. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame.
Lower assembly features:
- Custom-molded dual-lip seal on the crown race protects lower bearing in the toughest conditions.
- All components are precision machined in-house at Wolf Tooth from aircraft-grade aluminum to ensure the highest level of quality.
- Service and additional parts available.
Page 1 of 3
Next page