Skip to main content
      Free shipping on orders over $100.

Filter By:

Front

Campagnolo EPS Front Derailleur Nut & Washer
$17.90
- EPS specific front derailleur nut and washer
Campagnolo Veloce Braze-On Front Derailleur
$38.00
Campagnolo's Veloce Front Derailleur features an aluminum body and chrome-plated cage for low weight, durability and smooth shifting. And, it's compatible with both standard and compact cranks.
Campagnolo EPS Front Derailleur Stiffener
$79.00
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Campagnolo Chorus EPS Braze-On Front Derailleur
$400.00
Campagnolo's EPS Chorus Front Derailleur is made with a featherweight carbon fiber body for an unbeatable stiffness to weight ratio. The high torque, high drive motor is made in Switzerland to ensure the ultimate in shifting precision and reliability. Plus, the cage sports a special surface treatment for added stiffness and durability. - EPS Electronic Power Shift electronic front derailleur. This front derailleur requires specific, separate EPS wire harness, battery pack, and shifters - Monolithic technopolymer, carbon fiber body for the best stiffness and weight possible - Features an alloy outer cage, steel motor and gear housing - Waterproof, high over torque motor-gear box creates solid, ultra fast, under load front shifts - Automatic re-positioning/trim depending on the rear cog selected - Ride Setting allows returning home in the inner chainring should battery power fall - Rings: Double - Speed: 11 - Derailleur Capacity: 16 - Min/Max: 34/55 teeth - Weight: 149g
Campagnolo Super Record EPS Braze-On Front Derailleur
$735.00
Campagnolo's Super Record EPS Braze-On Front Derailleur delivers electronic precision to your front shifts. Hammer into the big ring and surge forward with a mere touch of a button, under heavy load or out of the saddle it's still as smooth as a dream. An aluminum internal cage plate and external carbon cage is powered by a servo motor to provide the incredibly quick shifting. It's versatile too, working with both standard and compact cranksets and auto-trimming to eliminate chain rub. - Drivetrain speeds: 11 - Derailleur capacity: 16T - Max ring (teeth): 55T - Double or triple: Double - Waterproof to 1 meter for 30 minutes (IP67 rated) - Weight: 127g
K-Edge Pro Braze-on Chain Catcher with SRM Magnet
$59.99
Same specs as the K13-002 Pro Braze-on Chain Catcher but includes a Cadence Magnet required for SRM Power Meters, as well as other leading power meter brands. - CNC Machined 6061-T6 Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamps - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge CX Chain Guide
$99.99
The new CX Single Ring Chain Guide is designed to prevent your chain from dropping off single-ring setups and built strong enough to endure brutal conditions of cyclocross. Specifically designed to be used in combination with SRAM CX1 and other single-ring setups. The lightweight aluminum cage limits lateral movement of the chain, the leading cause of chain derailment, adding high-end K-Edge quality insurance to your CX bike. Key Features and Benefits: - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains Attributes (specs): - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
Microshift T3828B Front Derailleur
$18.99
This microSHIFT dual pull trekking front derailleur is compatible with 2x8 mountain bike drivetrains, and cranks with up to a 48t large cog. - Durable metal construction - Compatible with Boost and non-Boost chainlines - 16t capacity - Drivetrain Speeds: 8 - Double or Triple: Double - Derailleur Capacity: 16 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Dual - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") - Max Ring (teeth): 48
Microshift R9 Front Derailleur
$22.99
Optimized for Shimano compatible 9-speed road drivetrains, R9 front derailleurs feature metal construction and rapid shifting response. - Cold-forged aluminum body
Microshift XLE Front Derailleur
$24.99 - $29.99
XLE front derailleurs deliver seamless compatibility with Shimano mountain systems, allowing you to repair or upgrade at an attractive price.
Microshift Marvo LT Front Derailleur
$25.99
Featuring full metal construction and precisely engineered linkages, Marvo level derailleurs deliver high-end performance that will last. - Full aluminum construction - Dual-pull design - 34.9mm version includes 31.8mm adapter
Microshift ADVENT 9-Speed Front Derailleur
$26.99
When your riding gets adventurous, more range means more versatility. With the ADVENT front derailleur, you can run a gravel-style 46-30T crank paired with an 11-42 cassette, resulting in a ridiculous 585% gear range. Will that work best for traditional touring, gravel, adventure racing, or bikepacking? The answer is yes. - Top Gear Teeth: 44-48T - Capacity: 16T - Band Clamp: 34.9mm (31.8mm w/Shim) - Chain Line: 48.8mm / Boost 51.8mm - Chainstay Angle: 63-68
Microshift XCD Front Derailleur
$27.99
Compatible with Shimano 10-speed mountain shifters as well as microSHIFT variations, the XCD front derailleur performs well under the pressures of mountain bike racing. - Full aluminum construction - Includes adapter for 31.8mm seat tube - Chainstay angle: 66-69°
Microshift Centos 2x11 Front Derailleur
$31.99
Centos front derailleurs are precisely manufactured for responsive, accurate shifting under race conditions. - Compatible with Shimano road 11-speed systems
Microshift Arsis Front Derailleur for 2 x 11 Speed
$45.99
Arsis is the pinnacle of microSHIFT's road component line. Featuring a cold-forged aluminum bracket and carbon outer link, this front derailleur delivers precise shifting under pressure. - Precisely designed cold-forged bracket for smooth, accurate shifts - Stiff lever arm for quick response - Designed for 43.5mm chainline - Chainstay angle: 61-66° - Compatible with Shimano 11-speed road systems
SRAM Chain Spotter
$30.00
SRAM's Chain Spotter fits on your seat tube beneath your front derailleur to keep the chain from coming off, which keeps you riding and prevents chain and frame damage, too. It's made of lightweight aluminum and includes all mounting hardware. Just bolt it on and go. No front derailleur fine-tuning needed.
SRAM GX 2x11 Front Derailleur (High Direct-mount, Top-pull)
$36.99
SRAM's low-profile GX 2x11 front derailleur was designed specifically for SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM GX 2x11 Front Derailleur (High Direct-mount, Bottom-pull)
$39.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically for SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11-speed rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM GX 2x11 Front Derailleur (Low Direct-mount, Bottom-pull)
$39.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM GX 2x11 Front Derailleur (High-clamp, Top-pull)
$40.99
SRAM's low-profile GX 2x11 front derailleur was designed specifically for SRAM GX 2x11-speed shifting systems. When paired with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • 2x11-speed • Max ring (teeth): 38-tooth • Weight: 150 grams
SRAM X7 2x10 Front Derailleur (High Direct-mount, Dual-pull)
$42.00
SRAM's X7 Front Derailleur is stiff, light and strong. It provides crisp, precise action for fast, smooth and reliable shifting season in and season out.
SRAM Apex Clamp-On Front Derailleur
$48.00
For smooth downshifts and fast upshifts, SRAM's Apex Front Derailleur is engineered for success. Its aluminum body is light as a feather while its steel cage is stiff for precision shifts everytime. The Apex Front Derailleur shifts great on standard and compact cranksets, too.
SRAM RED Front Derailleur
$112.00
The SRAM RED front derailleur, thanks to Yaw technology, changes everything, eliminating the need for shifter trim. Instead of simply moving back and forth, the derailleur cage actually rotates to maintain a consistent angular relationship with the chain. As a result, shifts feel more direct and precise. Combined with the SRAM RED crankset and X-GlideR chainrings, it delivers an unmatched performance advantage in front shifting. - SRAM Road 11-speed compatible - Yaw Technology - Slim spring design eliminates frame interference - Optimized for shifting with X-GlideR chainrings - Precision install markings - Integrated chain spotter protects your frame without adding any extra clunk and adjusts independently of the derailleur itself - Speeds: 2x11 - Material: Aluminum outer cage, Tool steel inner cage, Composite tail - Weight: 69g (braze-on), Chain spotter: 10.2 grams - Outer Cage: Aluminum - Compatibility: SRAM RED 22 & Force 22 Front Shift-Brake levers & X-GlideR Chainrings, SRAM R2C Aero SL-1190 shifters, SRAM R2C Aero SL-1150 shifters, SRAM 900 Aero brake levers, SRAM 500 Aero brake levers - Inner Cage: Tool steel
SRAM Force eTap AXS Front Derailleur
$349.99
The SRAM Force eTap AXS front derailleur is AXS enabled for easy personalization. The redesigned derailleur offers better rear-tire clearance—for those that explore all roads—and works perfectly with all chainring combinations. No compromises; never miss a shift. - AXS enabled for easy personalization - Elegant and streamlined form for more rear-tire clearance - SRAM Yaw trimless cage technology with an optimized cage profile for new chainring combinations - Compatible with existing eTap batteries
SRAM RED eTap AXS Front Derailleur
$400.00
The SRAM RED eTap AXS front derailleur leverages our advancements with X-Range gearing. The derailleur design carves out space for wide rear-tire clearance, making it a perfect fit for modern riding. And the shifting is quick and precise. - AXS enabled for easy personalization - Elegant and streamlined form for more rear-tire clearance - SRAM Yaw trimless cage technology with an optimized cage profile for new SRAM RED front chainring combinations - The most responsive, quick, and precise front shifting to date - Compatible with existing eTap batteries - Speeds: 2x12 - Front derailleur compatibility: Road-Yaw - Chainstay Angle: 61-66 degrees
Shimano Altus FD-M313 Front Derailleur
$15.99
Altus wide link 7/8-speed compatible dual-pull multi-fit front derailleur for recreational off-road use. - Compact conventional swing design - Low-friction wide linkage reduces shifting effort and increases rigidity - Dual-pull design allows it to be used with top or bottom cable routing - Multi clamp band is compatible with all frame dimensions - 66-69 degree chainstay to seat tube angle range - For outer chainring size from 42 to 48 tooth, total capacity 20 teeth - Compatible with 7- or 8-speed drivetrains
Shimano Altus FD-M310 Front Derailleur
$16.99
- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48
Shimano Altus M2000 Front Derailleur
$18.99
Shimano FD-M2000 front derailleurs feature Mega Lite and HyperGlide technologies for smooth and easy operation. They're a perfect replacement for your 3 x 9 drivetrain.
Shimano Claris FD-R2030 Front Derailleur
$24.99
Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.
Shimano Sora Front Derailleur
$24.99 - $36.99
For quick, dependable shifting, look no further than Shimano's Sora Front Derailleur. Sora front derailleurs are compatible with dual-control road shifters and flat-bar style Rapidfire Plus shifters.
Page 1 of 2 Next page