Front

For smooth downshifts and fast upshifts, SRAM's Apex Front Derailleur is engineered for success. Its aluminum body is light as a feather while its steel cage is stiff for precision shifts everytime. The Apex Front Derailleur shifts great on standard and compact cranksets, too.

SRAM's X7 Front Derailleur is stiff, light and strong. It provides crisp, precise action for fast, smooth and reliable shifting season in and season out.

Shimano Ultegra R8000 front derailleur. - Lighter front shifting operation - Link construction matches the force curve of the hand more naturally to reduce effort at the end of shifting - 100% perfect setting - New link construction allows for more flexible cable routing design - TL-FD68 and turning converter is not required in assembly - Easy and precise setting - Now possible to adjust cable tension on FD without specialized tools - Redesigned to fit wider gear pitch without sacrificing shifting performance - Shorter length of rear center (410mm) with O.L.D. 135mm - Model Number: FD-R8000-B - Series: Ultegra - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 106 grams

Campagnolo's EPS Chorus Front Derailleur is made with a featherweight carbon fiber body for an unbeatable stiffness to weight ratio. The high torque, high drive motor is made in Switzerland to ensure the ultimate in shifting precision and reliability. Plus, the cage sports a special surface treatment for added stiffness and durability. - EPS Electronic Power Shift electronic front derailleur. This front derailleur requires specific, separate EPS wire harness, battery pack, and shifters - Monolithic technopolymer, carbon fiber body for the best stiffness and weight possible - Features an alloy outer cage, steel motor and gear housing - Waterproof, high over torque motor-gear box creates solid, ultra fast, under load front shifts - Automatic re-positioning/trim depending on the rear cog selected - Ride Setting allows returning home in the inner chainring should battery power fall - Rings: Double - Speed: 11 - Derailleur Capacity: 16 - Min/Max: 34/55 teeth - Weight: 149g

Campagnolo's Veloce Front Derailleur features an aluminum body and chrome-plated cage for low weight, durability and smooth shifting. And, it's compatible with both standard and compact cranks.

- Series: SLX - Top Gear Teeth: 34-38T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 145.6g

Shimano's Alivio FD-T4000 Front Derailleur shifts your 3x9-speed setup beautifully. - Drivetrain Speeds: 9 - Double or Triple: Triple - Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Dual - Front Derailleur Clamp: 28.6mm (1-1/8") , 31.8mm (1-1/4") , 34.9mm (1-3/8") - Function: Top Swing - Max Ring Size: 48T

Features: - Smooth shifting and less cadence shock - Close step (10T) - SIDE SWING construction - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed

The Shimano Deore XT FD-M8100 front derailleur offers powerful and stable front shifting for 2 x 12 systems. - Increased traction range and no chain rub for long travel bikes - Extra wide range with front double 36-26T - Compatible with 2.3-inch tire on wider rims - Drivetrain Speeds: 12 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Front Pull - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") , 28.6 (1-1/8") - Front Derailleur Style: Side Swing - Max Ring (teeth): 38

• Alloy cage with titanium hardware offers light and durable performance • Side-swing design better accomodates more suspension designs and an additional 15mm of tire clearance • Increased pull strength provides faster shifting • 48.8mm Chainline Top Swing, Double • For frames with traditional cable routing • Derailleur Capacity: 10 • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Mountain • Front Derailleur Cable Pull: Bottom • Front Derailleur Clamp: 31.8 (1-1/4") , 28.6 (1-1/8") , 34.9 (1-3/8") • Max Ring (teeth): 38 teeth Side Swing, Double • Derailleur Capacity: 10 • Double or Triple: Double • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: 28.6 (1-1/8") , 31.8 (1-1/4") , 34.9 (1-3/8") • Front Derailleur Style: Side Swing • Max Ring (teeth): 38 teeth Side Swing, Triple • Derailleur Capacity: 18 • Double or Triple: Triple • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") , 28.6 (1-1/8") • Front Derailleur Style: Side Swing • Max Ring (teeth): 40 teeth

Shimano Side Swing front derailleurs feature improved cable routing for smooth and efficient front shifting effort and increased clearance for larger tires and shorter chainstays. - Optimal front system for internal cable routing - Enhanced maneuverability with plus-sized tires - Increased shifting efficiency and light and smooth operation force - D, E, M type mounts are available - M type mount requires 34.9mm adapter

• Alloy cage with titanium hardware offers light and durable performance • Side-swing design better accomodates more suspension designs and an additional 15mm of tire clearance • Increased pull strength provides faster shifting • 48.8mm Chainline Top Swing, Double • Derailleur Capacity: 10 • Double or Triple: Double • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Bottom • Front Derailleur Clamp: E-Type • Front Derailleur Style: Topswing • Max Ring (teeth): 38 teeth Side Swing, Double • Derailleur Capacity: 10 • Double or Triple: Double • Drivetrain Speeds: 11 • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: E-Type • Front Derailleur Style: Side Swing • Max Ring (teeth): 38 teeth • Max Ring (teeth): 38 teeth Side Swing, Triple • Derailleur Capacity: 18 • Double or Triple: Triple • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: E-Type • Front Derailleur Style: Side Swing • Max Ring (teeth): 40 teeth

- Lighter And Intuitive Shifting Operation - Natural Front Shift Lever Stroke - More Ergnomical Power Curve - New Link (Toggle) Construction - Precise & Easy Front Derailleur Set Up - More Cable Routing Options - Integrated Cable Tension Adjustment - New Link (Toggle) Construction For No Need Of Tl-Fd90 And Turning Converter Assembling - Adjustable Cable Tension On The Front Derailleur - Adapted For Race Specific Frame Design - Available Wider Front Gear Pitch - Shorter Length Of Rear Center With O.L.D. 135mm - Top Gear Teeth: 46-55T - Chain Stay Angle: 61-66 - Chain Line: 43.5mm

Shimano's Deore XT Dyna-Sys 10-speed Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear, and the body boasts wide parallel pivots that provide fast, smooth, and reliable shifts every time. This model is an E-type derailleur and is specifically optimized for 2x10 set ups.

The Shimano Deore M618 series front derailleurs provide reliable, accurate 2x10 speed shifting. They are available in a variety of mounting formats to suit most mountain bike frames.

• Wider clearance for large wheels • Compatible with shorter chain stays • Efficient cable routing for light shift operation • Increased traction range for long-travel and active rear suspension • Model Number : FD-M8020 • Series : DEORE XT • Swing Action : Side Swing • Cassette Compatibility : 11 • Maximum Capacity : Total capacity 10T • Top Gear Teeth : 34-38T • Cable Routing : Front-Pull • Chain Line : 48.8 • Chain Stay Angle : 66-69 • BB Mounting Plate : E-Type

Featuring full metal construction and precisely engineered linkages, Marvo level derailleurs deliver high-end performance that will last. - Full aluminum construction - Dual-pull design - 31.8 adapter included - Compatible with Shimano 9-speed mountain systems - Designed for 44/32/22 chainring configuration

Optimized for Shimano compatible 9-speed road drivetrains, R9 front derailleurs feature metal construction and rapid shifting response. - Cold-forged aluminum body

R8 front derailleurs feature a cold forged aluminum body and are optimized for 7 and 8-speed chains and Shimano-compatible road shifters.

• Alloy cage with titanium hardware offers light and durable performance • Side-swing design better accomodates more suspension designs and an additional 15mm of tire clearance • Increased pull strength provides faster shifting • 48.8mm Chainline Down Swing, Double • Derailleur Capacity: 10 • Double or Triple: Double • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Dual Pull • Front Derailleur Clamp: High Direct Mount • Front Derailleur Style: Traditional • Max Ring (teeth): 38 teeth Side Swing, Double • Derailleur Capacity: 10 • Double or Triple: Double • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: High Direct Mount • Front Derailleur Style: Side Swing • Max Ring (teeth): 38 teeth Side Swing, Triple • Derailleur Capacity: 18 • Double or Triple: Triple • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: High Direct Mount • Front Derailleur Style: Side Swing • Max Ring (teeth): 40 teeth

Sleek, balanced and consistent. Shimano's Tiagra 4700 series front derailleur provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: FD-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Top Gear Teeth: 53T - Maximum Capacity: 16T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Band Mount: 28.6 / 31.8 (w/AdapterS) 34.9

The new CX Single Ring Chain Guide is designed to prevent your chain from dropping off single-ring setups and built strong enough to endure brutal conditions of cyclocross. Specifically designed to be used in combination with SRAM CX1 and other single-ring setups. The lightweight aluminum cage limits lateral movement of the chain, the leading cause of chain derailment, adding high-end K-Edge quality insurance to your CX bike. Key Features and Benefits: - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains Attributes (specs): - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

• Increased traction range for long-travel and active rear suspension • Down Swing and Top Swing • Model Number : FD-M8025 • Series : DEORE XT • Swing Action : Side Swing • Cassette Compatibility : 11 • Maximum Capacity : Total capacity 10T • Top Gear Teeth : 34-38T • Cable Routing : Dual-Pull, Top-Pull exclusive • Chain Line : 48.8mm (compatible with the special crankset which chain line is 3mm outboard; the special frame is required.) • Chain Stay Angle : 66-69 • BB Mounting Plate : Low-Clamp

Shimano FD-M2000 front derailleurs feature Mega Lite and HyperGlide technologies for smooth and easy operation. They're a perfect replacement for your 3 x 9 drivetrain.

Shimano's Tiagra Front Derailleur (3x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with cascaded technology from the top shelf Dura Ace line. - Model Number: FD-4703 - Series: Tiagra - Cassette Compatibility: 10 - Top Gear Teeth: 50T - Maximum Capacity: 20T - Chain Stay Angle: 63-66 - Chain Line: 45 - Band Mount: 28.6mm / 31.8mm (w/AdapterS) 34.9mm

Full metal construction provides stiffness and durability in this Shimano 9-speed road compatible front derailleur. - Full aluminum construction - Compatible with 9-speed Shimano road drivetrains - Designed for use with 52/42/30T chainrings

The microSHIFT R538 front derailleur is designed for 3 x 8-speed drivetrains, and is compatible with Shimano 8-speed systems.

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48

Features: - Smooth shifting and less cadence shock - Close step (10T) - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed

For quick, dependable shifting, look no further than Shimano's Sora Front Derailleur. Sora front derailleurs are compatible with dual-control road shifters and flat-bar style Rapidfire Plus shifters.