Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included
The TL 5.0 SL has five ultra bright LED’s with four different operating modes, including three different flash modes. New for 2015, the amber Side Lights help to provide even more visibility from the sides of the rider. The TL 5.0 SL will help keep you safe and seen from behind (180 degree visibility). The TL 5.0 SL operates on 2 AAA batteries (included) for up to 100 hours on flash. - 5 Ultra Bright LEDs - A wearable safety light – clip onto various straps, belt loops, etc. - 100 hours run time - Budget-friendly quality light - Eye catching flash mode patterns - 4 operating modes - Runs on AAA batteries - FL 1 Standard IP64, water resistant WARRANTY The TL 5.0 SL is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seatpost Mount - 2 AAA Batteries
The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h
Replacement LED assembly for the Centro LED helmet.
Be visible and be safe! The Blinky 1 aims 3 bright LEDs directionally to provide over 220 degrees of light visible from up to a mile away! Its soft-touch power switch toggles between flashing and steady modes for up to 100 hours of run time on the included batteries. It mounts to seatposts and seatstays and clips on pockets and packs, too.
Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!
CatEye's Omni 5 Taillight uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.
Three bright LEDs with over 270 degrees of weather-resistant visibility. Send the right signal Added visibility. Flare 1 is powered by three ultra-bright LEDs that provide over 75 hours of run time on only two AAA batteries. Batteries included—when else does that ever happen? Product details - Be seen with Bontrager's focused optics and over 270-degree visibility - Three bright white, environmentally-friendly LEDs - Three modes—steady high beam, flashing and random flashing - 80+ hour run time - Includes AAA batteries and a seat post clamp
These handy little handlebar accessories are activated by your bike's motion, so they're ready to go whenever you are! - Motion-activated lights - One LED per plug - Mounts easily into standard (17.5–19mm internal diameter) handlebars
Excellent side visibility and 20 lumens of output make the Octodon a bright, reliable taillight to ensure you'll be seen on your nighttime rides. - 270-degree visibility - Flash and constant mode - Tool-free mounting bracket - Also works clipped to a bag/waistband - 2 AAA batteries included
Portland Design Works' Red Planet Taillight will enhance your visibility after dark. It boasts five bright LEDs with three modes to notify others of your presence. And, the Red Planet includes mounts for a seatpost, seatstay, and backpack, so you can put it wherever you want. - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz)
Maximize your visibility with this amazing taillight. The Blinky 7 aims 7 bright LEDs directionally to provide over 220 degrees of light visible from up to a mile away! The ultra-compact case is weatherproof, light and durable. And, the Blinky 7 includes a bike mount, clip mount and arm strap. Plus, the included 2 AAA batteries offer run times of up to 100 hours.
The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop
German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included
Compact, aero-post-compatible safety light with two bright LEDs. It features a super-lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of runtime (seven hour increase) with highly improved optics. Its Wide Angle Lens offers up to 270° of visibility. The KTV Drive rear provides up to 10 lumens and five output/flash modes. And it features an integrated USB stick for convenient cable-free recharging. Specs - Max Lumens: 10 - Weight: 54g - Max Runtime: 20 hours - Recharge Time: 3 hours
Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.
-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams
Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II
The Superflash 65 brings a whole new level of versatility to battery powered tail lights. With four modes (High, Low, Courtesy and Superflash) this tail light provides 65 lumens and 220° of visibility that will get you noticed day or night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 40 hrs (high – 30 lm), 90 hrs (low – 7 lm), 45 hrs (Courtesy - 20-60 lm) and up to 130 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and horizontal clip mount for multiple mounting options - 70 grams
With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs
To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h
For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 35 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 35 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 35 employs a custom made, built in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. - Daylight Visible Flash (DVF) - A wearable safety light – clip onto various straps, belt loops, etc. - Visible up to 1 mile - Internal reflector = visible if light on off mode - Easily replaceable AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - FL 1 Standard IP64, water resistant WARRANTY The CherryBomb 35 is backed by NiteRider’s lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seatpost Mount - 2 AAA Batteries
Safety is job #1 and the Vya Series delivers premium safety with the convenience commuters love. Vya Switch is the latest addition to the Vya Family, foregoing auto on/off technology for a traditional button design. Why the new design? We had multiple requests from riders who loved the power and simple effectiveness of our Vya taillight but wanted to adjust runtime or change to a solid mode for group riding and bike path commutes. The button control also allows cyclocross and mountain bikers who hit pavement en route to the dirt the ability to turn the light on/off as needed. Oh yeah, did we mention the purists who are so accustomed to manually turning their lights on and off that not doing so creates that 'Did I forget Something' feeling? Yes control freaks – Vya Switch is for you! - 100 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Switch control provides multiple modes for longer runtime plus a solid mode perfect for bike paths/group rides - Designed for traditionalists, Vya Switch is turned on/off by button (does not have the auto on/off feature of other Vya Lights) - SafePulse beam pattern scientifically designed to enhance a passing driver's ability to judge the cyclist's distance and direction of travel without the risks associated with flashing lights - Horizontal design with custom optic gives a powerful, concentrated burst of light to be recognizable over 2KM away – perfect for road cyclists - 100 lumen SafePulse output maintains safety for a full 6 hours; for all-day adventures switch to 50 lumen SafePulse mode for an impressive 12 hours runtime - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) - Lumens: 100 (high), 50 (medium), 25 (low), 100 (SafePulse) - Runtime: 360 min (high), 720 min (medium), 240 min (low), 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 30 grams - Product Dimensions: 2.6" x 1.3" x 0.8" - Compatible Mounts: Seat Post
MSW USB rechargeable taillight. Includes micro USB cable for charging. - Tool-free installation - Aluminum body construction - 15 lumen output - Fits 19mm–48mm tubing - 28g weight
Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty
With a dazzlingly bright 28 LED PB Power Array and three modes, this USB rechargeable light is like a Scarlet Begonia for the back of your bike. For added safety, it has a CPSC certified reflector in the lens to keep you visible when the light is off. Versatile mounting options allow you to attach it to your seat post or rear rack with the included brackets. - PB 28 LED power array and CPSC certified reflector provides steady, Courtesy & Superflash modes - FL1 Tested - Run times: 5 hrs (steady – 20 lm), 9 hrs (Courtesy – 6-18 lm) and up to 30 hrs (Superflash - 20 lm) - Provide 160-degrees of visibility - Highly visible, even in daylight - Dust and water resistance rated to IP65 standard - 700 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Includes rear rack and seat post mounts plus clip mount for multiple mounting options - 65 grams
Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)
Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty
Page 1 of 3 Next page